MX 32x32 DVI-PRO
Fully configurable DVI matrix switcher from 8x8 to 32x32 for large applications
MX 32x32 DVI-PRO is a high performance, modular expandable DVI routing switcher, offering up to 32 inputs and up to 32 outputs. Each Input and Output card contains 8 DVI connectors, different configurations from 8x8 up to 32x32 are available. The DVI crosspoint matrix switcher supports all DVI-D resolutions up to 1920x1200 and 2048x1080. All inputs are compensated for up to 50m long DVI copper cable, eliminating the use of DVI repeaters, or cable equalizers. Cable compensation is done automatically, no adjustment is needed. Each input is able to emulate any monitor EDID data from a 100 EDID list - 50 of them are user programmable. All outputs of the DVI matrix router are reclocked for stable, jitter free signal transmission. Each DVI output powers fiber optic DVI cables on +5V pin, that allows transmission of DVI signals for long distances. The unit can be controlled either by RS232 / RS422 port or TCP/IP LAN connection or by built in website.
Features
 Routing: from 8x8 up to 32x32 single link DVI signals
50 meter DVI cable compensation on all inputs
Field-upgradeable, modular design
Fiber Cable powering on each output
Ethernet control for remote system monitoring and control
Web page hosting capabilities
1920x1200 and 2048x1080 maximal resolutions
Front panel buttons control
Advanced EDID emulator, routing and management - learnes, stores and emulates up to 100 EDID data
RS 232 or RS422 control
TCP/IP LAN control port with built in WEB access
Low noise cooling fans
Advanced power management and error detection
Connectors
| |
8 inputs |
16 inputs |
24 inputs |
32 inputs |
| 8 outputs: |
8x8 |
16x8 |
24x8 |
32x8 |
| 16 outputs |
8x16 |
16x16 |
24x16 |
32x16 |
| 24 outputs |
8x24 |
16x24 |
24x24 |
32x24 |
| 32 outputs |
8x32 |
16x32 |
24x32 |
32x32 |
| LAN |
RJ45 |
|
|
|
| GPIO: |
Phoenix 5 pole |
|
|
|
Available I/O sizes
| Inputs: |
24 pole DVI-D connector |
| Output: |
24 pole DVI-D connector |
| Power: |
IEC Power inlet |
| RS-232 or 422: |
9p sub D female |
| LAN |
RJ45 |
| GPIO: |
Phoenix 5 pole |
Specifications
| Inputs: |
8x DVI-D single link / input card |
| Bit rate: |
1.65 Gbit/s per colour |
| Equalization: |
40dB automatically |
| Resolution: |
640x480 to 1920x1200 and 2048x1080 |
| EDID memory |
50 factory preset, and 50 user programmable |
| RS232 / 422 |
9600 Baud Rx; Tx |
| LAN |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
| Routing: |
32x32 non-blocking - any input(s) to any output(s) |
| Outputs: |
8x DVI-D single link / output card |
| Reclocking: |
Yes |
| +5V current |
500mA / DVI output connector |
| Power: |
100 to 240 V AC or DC 3.0 Amps |
| Dimensions: |
5U rack mount, 221(height) x 440(width) x 302(depth) mm |
| Compliance: |
CE |
| Warranty: |
3 years |
|
 |
 download  zoom  connection  portfolio |
|
Lightware matrix switchers route signals between multiple sources and destinations. Our nonblocking architecture allows to route any source signal to any destination, or a source to multiple destinations. User frendly control functions make them ideal for rental staging purpose.
MX-DVI-FR32
32x32 DVI routing frame, accepts 4input and 4 output boards
Modular I/O boards:
MX-DVID-IB
8 channel DVI-D single link input card with DVI-D connectors. Adaptive equalization for up to 60 meter DVI cable and EDID Management on each input.
MX-DVID-OB:
8 channel single link DVI-D output board with signal reclocking.
MX-OPT-DVI-IB-NT
8 channel fiber optical input card. One multimode fiber for each DVI channel. Neutrik duplex LC connectors, max 2600 meter transmission distance.
MX-OPT-DVI-OB-NT
8 channel fiber optical output card with signal reclocking. One multimode fiber for each DVI channel. Neutrik duplex LC connectors, max 2600 meter transmission distance.
MX-RJ45-DVI-IB
8 channel RJ45 input board for DVI signal transmission over single CAT5 cable. DDC and EDID emulation on second, DDC connector. Input cable equalization. Use with DVI-UTP TX200 transmitter.
MX-RJ45-DVI-OB
8 channel RJ45 output board for DVI signal transmission over single CAT5 cable. Signal reclocking. Use with DVI-UTP RX100 receiver.
|
|
