MX 16x16 DVI PRO
Fully configurable hybrid matrix switcher supporting DVI, Fiber and CAT5 transmission from 8x8 up to to 16x16
MX16x16DVI-Pro is the highest performance modular expandable DVI
routing switcher that offers up to 16 inputs and up to 16 outputs.
Multiple type input and output cards (DVI; Fiber and CAT5) can be used
in mixed format that allows the most flexible and integrated solution
on the market.
Each Input and Output card contains 8 channels, and any
combination can be used in a single frame. For short distances up to 50
meters the DVI or CAT5 I/O cards are suggested, for longer distances
fiber solution is suggested.
Single Fiber Technology:
Lightware single fiber technology offers the latest, state of the art
digital signal transmission. Only one multimode fiber cable is used per
one DVI signal, opposite to competitors, who use 4 fiber channels and
copper wires. Single fiber technology lowers the system infrastructure
cost and isolates sources and receivers from ground loops and hum
noises. MX16x16DVI-Pro fiber crosspoint matrix switcher supports all
DVI-D resolutions up to 1920x1200 and 2048x1080.
All outputs of the DVI matrix router are
reclocked for stable, jitter free signal transmission. Each DVI output
powers fiber optic DVI cables on +5V pin, that allows transmission of
DVI signals for long distances.
The unit can be controlled either by RS232 / RS422 port or TCP/IP LAN connection or by built in website.
Features
 Hybrid fiber, DVI and CAT5 input and output capabilities
Single Fiber Technology
Rugged Neutrik fiber connectors for rental applications
DVI signal transmission over one CAT5 cable
Routing from 8x8 up to 16x16 single link DVI signals
50 meter DVI cable compensation on all DVI and RJ45 inputs
Field-upgradeable, modular design
Web page hosting capabilities
1920x1200 and 2048x1080 maximal resolutions
Front panel buttons control
Advanced EDID Management
RS 232 or RS422 and Ethernet control
Connectors
| DVI input and output: |
24 pole DVI-D connector |
| CAT5/CAT6 input and output: |
Catecory 6 RJ45 shielded |
| Fiber: |
LC or Neutrik NO2-4FD LC duplex |
| Power: |
IEC Power inlet |
| RS-232 or 422: |
9p sub D female |
| LAN: |
RJ45 |
| GPIO: |
Phoenix 5 pole |
Specifications
| Routing |
|
| 16x16 non-blocking - |
any input(s) to any output(s) |
| Bit rate: |
1.65 Gbit/s per colour |
| Resolution: |
640x480 to 1920x1200 or 2048x1080 |
| EDID memory |
50 factory preset, and 50 user programmable |
| EDID emulation |
256 Byte Extended EDID v1.3 |
| Control |
|
| Front panel buttons: |
Yes |
| RS232 / 422: |
9600 Baud Rx; Tx |
| LAN: |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
| WEB: |
built in website |
| Inputs DVI and RJ45 |
|
| DVI8x DVI-D single link / input card |
|
| Equalization: |
40dB automatically |
| Outputs DVI and RJ45 |
|
| 8x DVI-D single link / output card |
|
| Reclocking: |
Yes |
| +5V current: |
500mA / DVI output connector |
| Fiber inputs and outputs |
|
| Mode: |
Multimode 850 nm |
| Transmission distance: |
2600 meters |
| Connectors: |
LC or Neutrik NO2-4FD type LC compatible |
| Power: |
100 to 240 V AC or DC 3.0 A |
| Dimensions: |
4U rack mount, 176.5(height) x 440(width) x 302(depth) [mm] |
| Compliance: |
CE |
| Warranty: |
3 years |
Optional accessories
| DVI-UTP TX200 |
CAT5 transmitter with local monitor output and EDID Management |
| DVI-UTP RX100 |
CAT5 receiver with DVI output |
| DVI-OPT TX200 |
Fiber optical transmitter. DVI signal transmission over one multimode fiber. Local monitor output. |
| DVI-OPT RX100 |
Fiber optical receiver with one DVI output. |
|
 |
 download  zoom
|
MX-DVI-FR16
16x16 DVI routing frame, accepts 2 input and 2 output boards
Modular I/O boards:
MX-DVID-IB
8
channel DVI-D single link input card with DVI-D connectors. Adaptive
equalization for up to 60 meter DVI cable and EDID Management on each
input.
MX-DVID-OB:
8 channel single link DVI-D output board with signal reclocking.
MX-OPT-DVI-IB-NT
8
channel fiber optical input card. One multimode fiber for each DVI
channel. Neutrik duplex LC connectors, max 2600 meter transmission
distance.
MX-OPT-DVI-OB-NT
8
channel fiber optical output card with signal reclocking. One multimode
fiber for each DVI channel. Neutrik duplex LC connectors, max 2600
meter transmission distance.
MX-RJ45-DVI-IB
8
channel RJ45 input board for DVI signal transmission over single CAT5
cable. DDC and EDID emulation on second, DDC connector. Input cable
equalization. Use with DVI-UTP TX200 transmitter.
MX-RJ45-DVI-OB
8
channel RJ45 output board for DVI signal transmission over single CAT5
cable. Signal reclocking. Use with DVI-UTP RX100 receiver.
 |
|
